资源类型

期刊论文 7

年份

2019 1

2017 1

2016 1

2009 3

2007 1

关键词

300 M钢 1

WC涂层 1

摩擦磨损 1

电镀硬铬 1

疲劳 1

超音速火焰喷涂 1

展开 ︾

检索范围：

排序： 展示方式：

Preparation and performance of soft actuator based on IPMC with silver electrodes

Qi CHEN, Ke XIONG, Kan BIAN, Ning JIN, Bangfeng WANG,

《机械工程前沿（英文）》 2009年 第4卷 第4期   页码 436-440 doi: 10.1007/s11465-009-0054-5

摘要： The surface electrodes of traditional ionic polymer-metal composites (IPMC) are made of platinum. To reduce the production cost, nonprecious metals such as silver is proposed. A new approach of electroless silver plating based on chemical deposition method is adopted, getting two types of IPMCs, Pt-Ag IPMC, and Ag-Ag IPMC. The microscopic analysis, driving abilities tests, and their surface-electrode resistance analysis show that Ag and Pt particles penetrate inside Nafion membrane with gradient distribution throughout the membrane. The maximum electro-active bending deformation angles of the specimens, which are obtained under the same specimen dimension and constrains, are about 60° for Pt-Pt IPMC and Pt-Ag IPMC and 90° for the Ag-Ag IPMC, respectively, corresponding to the driving voltage of 3 V, 4 V, and 1.5 V. The surface-electrode resistance of Ag-Ag IPMC is the lowest and the most stable, which shows that the proposed approach is valid. The experiments show that the IPMC technology based on the silver electrode is feasible.

关键词： ionic polymer-metal composites (IPMC)     Nafion     intelligent material     soft actuators     electroless silver plating    

HTML PDF 收藏

Performance of ionic polymer-metal composite (IPMC) with different surface roughening methods

Ning JIN, Bangfeng WANG, Kan BIAN, Qi CHEN, Ke XIONG,

《机械工程前沿（英文）》 2009年 第4卷 第4期   页码 430-435 doi: 10.1007/s11465-009-0053-6

摘要： Based on permeation and double chemical reduction technology, this paper researches the manufacture of Pt-ionic polymer metal composites (IPMC) and the effect of three types of surface roughening methods on the manufacture and performance of IPMC. The roughening methods include manual polishing, sanding machine polishing, and plasma surface treatment. The appearance and scanning electron microscopy (SEM) features, electro-active deformation and surface resistance characteristics of these IPMC specimens were obtained and compared through specimen tests. The results of the tests indicate that surface roughening technology obviously influences the performance of IPMC. The uniformity and compactness of the metal deposited on the surface and inside the Nafion film are improved by improving surface roughening uniformity. However, the electro-active deformation capability and surface resistance of the specimens decrease at the same time. There is an approximate linear increase relationship between the driving voltage and the bending deformation of the IPMC specimen within a certain voltage range. Under the same specimen dimension, constraints, and driving voltage (3V), the maximum electro-active bending deformation angles of the specimens are about 60°, 45°, and 15° for manual polishing, sanding machine roughening, and plasma treatment, respectively.

关键词： ionic polymer metal composites (IPMC)     surface roughening     scanning electron microscopy (SEM) analyze     actuator     electroless plating    

HTML PDF 收藏

Electrocoagulation process for the treatment of metal-plating wastewater: Kinetic modeling and energy

Fatih Ilhan, Kubra Ulucan-Altuntas, Yasar Avsar, Ugur Kurt, Arslan Saral

《环境科学与工程前沿（英文）》 2019年 第13卷 第5期 doi: 10.1007/s11783-019-1152-1

摘要： The wastewater from industrial area was treated by EC via Fe and Al electrodes. Cu, Ni, Cr and Zn were highly removed at the first minutes, simultaneously. Pseudo-2nd-order was found to be more suitable for kinetics. Adsorption capacities based on kinetic modeling were observed as Cr>Cu>Ni>Zn. The chemical cost in the case of pH adjustment after EC was less as 3.83 $/m3. It is known that wastewater produced by the metal-plating industry contains several heavy metals, which are acidic in nature and therefore toxic for the environment and for living creatures. In particular, heavy metals enter the food chain and accumulate in vital organs and cause serious illness. The precipitation of these metals is mostly achieved by pH adjustment, but as an alternative to this method, the electrocoagulation process has investigated in this study using iron and aluminum electrodes. The effects of the pH adjustment on removal before and after the electrocoagulation process were investigated, and cost analyses were also compared. It was observed that a high proportion of removal was obtained during the first minutes of the electrocoagulation process; thus, the current density did not have a great effect. In addition, the pH adjustment after the electrocoagulation process using iron electrodes, which are 10% more effective than aluminum electrodes, was found to be much more efficient than before the electrocoagulation process. In the process where kinetic modeling was applied, it was observed that the heavy metal removal mechanism was not solely due to the collapse of heavy metals at high pH values, and with this modeling, it was seen that this mechanism involved adsorption by iron and aluminum hydroxides formed during the electrocoagulation process. When comparing the ability of heavy metals to be adsorbed, the sequence was observed to be Cr>Cu>Ni>Zn, respectively.

关键词： Electrochemical treatment     Heavy metals     Kinetic modeling     Pseudo first order kinetic     Pseudo second order kinetic    

HTML PDF 收藏

超音速火焰喷涂WC涂层替代电镀硬铬：疲劳和摩擦磨损性能

周克崧,邓春明,刘敏

《中国工程科学》 2009年 第11卷 第10期   页码 48-54

摘要：

以WC涂层在飞机起落架的应用作为研究背景，对300 M超高强钢基体上电镀硬铬和超音速火焰喷涂WC-17Co和WC-10Co4Cr涂层的疲劳及与Al—Ni—Bronze合金的摩擦磨损性能进行了研究。结果表明，有WC涂层300 M钢的疲劳寿命与无涂层300 M钢的疲劳极限和过载下的疲劳寿命相当，WC涂层对300 M钢的疲劳寿命不会产生不良影响；而电镀硬铬使300 M钢的疲劳极限降低120 MPa，疲劳寿命则降低70 %～90 %。疲劳失效分析表明， WC涂层中的疲劳裂纹在界面上发生偏斜，转向沿界面扩展，因此对基体的疲劳寿命没有影响；而电镀硬铬中的的疲劳裂纹扩展到基体表面，显著降低基体的疲劳寿命。10#航空液压油润滑下涂层与Al—Ni—Bronze合金的摩擦磨损表明，与电镀硬铬对磨时，Al—Ni—Bronze合金发生明显的磨损，同时因质量转移而导致电镀硬铬的质量显著增加；而WC涂层仅略有失重，相应地Al—Ni—Bronze合金的失重仅为与电镀硬铬层磨损失重的1/50～1/100。WC涂层与Al—Ni—Bronze合金的磨损机理主要为磨粒磨损；电镀硬铬与Al—Ni—Bronze合金的磨损机理主要为黏着磨损。

关键词： 300 M钢     超音速火焰喷涂     WC涂层     电镀硬铬     疲劳     摩擦磨损    

HTML PDF 收藏

Plated contacts for solar cells with superior adhesion strength to screen printed solar cells

R. CHEN,S. WANG,A. WENHAM,Z. SHI,T. YOUNG,J. JI,M. EDWARDS,A. SUGIANTO,L. MAI,S. WENHAM,C. CHONG

《能源前沿（英文）》 2017年 第11卷 第1期   页码 72-77 doi: 10.1007/s11708-016-0428-4

摘要： The improvement of adhesion strength and durability of plated contacts is required for cell manufacturers to gain confidence for large-scale manufacturing. To overcome weak adhesion at the metal/Si interface, new approaches were developed. These involve the formation of laser-ablated anchor points, or grooves in the extreme case of overlapping anchor points, in the heavily doped silicon surface. When plated, these features greatly strengthen the mechanical adhesion strength of the metal. A stylus-based adhesion tester was developed specifically for evaluating the effectiveness of plated contacts to smooth silicon surfaces. The use of such a tester was also extended in this work to textured and roughened surfaces to allow evaluation of different metal contacting approaches. The adhesion strengths for various metal contacting schemes were evaluated, including screen-printed silver contacts, nickel/copper (Ni/Cu) light-induced plated (LIP) contacts for laser-doped selective emitter (LDSE) cells, buried-contact solar cells (BCSCs), and Ni/Cu LIP contacts formed with laser-ablated anchoring points in selective emitter (LAASE) cells. The latter has superior adhesion strength. The standard “peel test” of the industry was compared to the stylus-based adhesion testing, with the latter shown value for testing metal contacts on smooth surfaces but with caution needed for use with textured or roughened surfaces.

关键词： light-induced plating     metal adhesion strength     copper plating     metal contacts     solar cell durability     silicon solar cells    

HTML PDF 收藏

Hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol on NiB/SiO2 amorphous alloy catalyst

SONG Yun, LI Wei, ZHANG Minghui, TAO Keyi

《化学科学与工程前沿（英文）》 2007年 第1卷 第2期   页码 151-154 doi: 10.1007/s11705-007-0028-2

摘要： NiB/SiO amorphous alloy catalyst was prepared by power electroless plating method and characterized by induction coupled plasma (ICP), Brunauer Emmett Teller method (BET), transmission electron microscope (TEM) and X-ray diffraction (XRD) techniques. The catalytic performance of NiB/SiO was investigated for the hydrogenation of furfuryl alcohol (FA) to tetrahydrofurfuryl alcohol (THFA). The effects of operational conditions, such as reaction temperature, pressure, and stirring rate were carefully studied. The proper conditions were determined as the following: pressure 2.0 MPa, temperature 120?C and stirring rate 550 r/min. A typical result with FA conversion of 99% and THFA selectivity of 100% was obtained under such conditions, which was close to that over Raney Ni.

关键词： following     Brunauer     electroless     temperature     transmission    

HTML PDF 收藏

Efficient removal of heavy metals from electroplating wastewater using polymer ligands

Md. Lutfor RAHMAN,Shaheen M. SARKAR,Mashitah Mohd YUSOFF

《环境科学与工程前沿（英文）》 2016年 第10卷 第2期   页码 352-361 doi: 10.1007/s11783-015-0783-0

摘要： Poly(hydroxamic acid)-poly(amidoxime) chelating ligands were synthesized from poly(methyl acrylate-co-acrylonitrile) grafted acacia cellulose for removing toxic metal ions from industrial wastewaters. These ligands showed higher adsorption capacity to copper (2.80 mmol?g ) at pH 6. In addition, sorption capacities to other metal ions such as iron, zinc, chromium, and nickel were also found high at pH 6. The metal ions sorption rate (t ) was very fast. The rate of adsorption of copper, iron, zinc, chromium, nickel, cobalt, cadmium and lead were 4, 5, 7, 5, 5, 8, 9 and 11 min, respectively. Therefore, these ligands have an advantage to the metal ions removal using the column technique. We have successfully investigated the known concentration of metal ions using various parameters, which is essential for designing a fixed bed column with ligands. The wastewater from electroplating plants used in this study, having chromium, zinc, nickel, copper and iron, etc. For chromium wastewater, ICP analysis showed that the Cr removal was 99.8% and other metal ions such as Cu, Ni, Fe, Zn, Cd, Pb, Co and Mn removal were 94.7%, 99.2%, 99.9%, 99.9%, 99.5%, 99.9%, 95.6% and 97.6%, respectively. In case of cyanide wastewater, the metal removal, especially Ni and Zn removal were 96.5 and 95.2% at higher initial concentration. For acid/alkali wastewater, metal ions removing for Cd, Cr and Fe were 99.2%, 99.5% and 99.9%, respectively. Overall, these ligands are useful for metal removal by column method from industrial wastewater especially plating wastewater.

关键词： heavy metals     adsorption     wastewater     chelating ligands     plating industry    

HTML PDF 收藏

标题 作者 时间 类型 操作

Preparation and performance of soft actuator based on IPMC with silver electrodes

Qi CHEN, Ke XIONG, Kan BIAN, Ning JIN, Bangfeng WANG,

期刊论文

Performance of ionic polymer-metal composite (IPMC) with different surface roughening methods

Ning JIN, Bangfeng WANG, Kan BIAN, Qi CHEN, Ke XIONG,

期刊论文

Electrocoagulation process for the treatment of metal-plating wastewater: Kinetic modeling and energy

Fatih Ilhan, Kubra Ulucan-Altuntas, Yasar Avsar, Ugur Kurt, Arslan Saral

期刊论文

超音速火焰喷涂WC涂层替代电镀硬铬：疲劳和摩擦磨损性能

周克崧,邓春明,刘敏

期刊论文

Plated contacts for solar cells with superior adhesion strength to screen printed solar cells

R. CHEN,S. WANG,A. WENHAM,Z. SHI,T. YOUNG,J. JI,M. EDWARDS,A. SUGIANTO,L. MAI,S. WENHAM,C. CHONG

期刊论文

Hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol on NiB/SiO2 amorphous alloy catalyst

SONG Yun, LI Wei, ZHANG Minghui, TAO Keyi

期刊论文

Efficient removal of heavy metals from electroplating wastewater using polymer ligands

Md. Lutfor RAHMAN,Shaheen M. SARKAR,Mashitah Mohd YUSOFF

期刊论文